Toggle search
Toggle menu
3
73
6
153
FDM Support
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Bambu Lab P2S: Difference between revisions

From FDM Support
More actions
Newer edit →
VisualWikitext
Chris (talk | contribs)
80 edits
New Page for P2S Settings
 
Chris (talk | contribs)
80 edits
Reworked the settings to reflect the newest version, Reworked the text
Line 1: Line 1:
== (Profile is work in progress - March 2026) ==
==== Sources and Inspiration ====
The following settings have been optimized for the BambuLab P2S. These settings are based on HoHansen, Timnolte, Painted4Combat and ObscuraNoc settings and tweaks. At this point - Thank you for your work. Disclaimer: Please always check before printing if the settings are applicable for your setup, printer and environment.
The following settings have been optimized for a BambuLab P2S. These settings and tweaks are based on the work of HoHansen, Timnolte, BlockBadger, Painted4Combat, ObscuraNoc and many more. At this point - Thank you for your work. If you like to read more about their specific settings, I linked to their posts at the end of this page.
 
Disclaimer: Please always check before printing if the settings are applicable for your setup, printer and environment.


==== Requirements for these settings ====
==== Requirements for these settings ====


* The nozzle is a stainless steel 0.2mm
* The nozzle is a stainless steel 0.2mm from BambuLab
* The filament is SUNLU PLA+ 2.0.
* The filament is SUNLU PLA+ 2.0 in the color bone white. Other colors might work as well.
* OrcaSlicer in the newest version (this guide is written based on 2.3.2-rc)
* OrcaSlicer in the newest version (this guide is written based on 2.3.2-rc)  
* Textured PEI Plate. Another will work as well but you will need to tweak your brim settings, temperature and cooling.
* Textured PEI Plate. Another will work as well but you will need to tweak your brim settings, temperature and cooling.


==== Settings ====
==== Settings ====
Start with a standard profile of the P2S and set it to 0.2mm nozzle, the according build plate and the filament type. Then set your base process settings to 0.08mm layer height and start from there. The settings are split into the following sections:
The settings are split up into the following section:


* Printer
* Baseline - How to start
* Filament
* Printer - Specific settings for the printer to made.
* Process
* Filament - Configuration for the SUNLU PLA+ 2.0 filament.
* Process - Printing profile.


Every setting is listed as a screenshot taken from OrcaSlicer.
Every setting is listed as a screenshot taken from OrcaSlicer.
===== Baseline =====
Start with a standard profile of the P2S and set it to 0.2mm nozzle, the according build plate and the filament type. Then set your base process settings to 0.08mm layer height. This is your baseline for the following configuration, since we will only touch certain values and leave the rest as configured in the standard profile of the 0.08mm layer height.


===== Printer =====
===== Printer =====
Line 25: Line 31:


[[File:Filament_Cooling.png|722x722px]]
[[File:Filament_Cooling.png|722x722px]]
[[File:Filament_Overwrite.png|722x722px]]


===== Process =====
===== Process =====


====== '''Quality Settings''' ======
====== '''Quality Settings''' ======
[[File:Q1.png]]
[[File:Q (1).png]]


[[File:Q2.png]]
[[File:Q (2).png]]


[[File:Q3.png]]
[[File:Q (3).png]]


[[File:Q4.png]]
[[File:Q (4).png]]


====== '''Strength''' ======
====== '''Strength''' ======
[[File:St1.png]]
[[File:St (1).png]]
 
[[File:St (2).png]]


[[File:St2.png]]
[[File:St (3).png]]


====== '''Speed''' ======
====== '''Speed''' ======
[[File:Sp1.png]]
[[File:Sp (1).png]]


[[File:Sp2.png]]
[[File:Sp (2).png]]


[[File:Sp3.png]]
[[File:Sp (3).png]]


====== '''Support''' ======
====== '''Support''' ======
[[File:Sup1.png]]
Supports might need different settings per model and are as well subject to personal preferences.
 
[[File:Sup (1).png]]


[[File:Sup2.png]]
[[File:Sup (2).png]]


[[File:Sup3.png]]
[[File:Sup (3).png]]


====== '''Multimaterial''' ======
====== '''Multimaterial''' ======
[[File:M1.png]]
[[File:M (1).png]]


====== '''Others''' ======
====== '''Others''' ======
[[File:O1.png]]
[[File:O (1).png]]
 
[[File:O (2).png]]
 
==== Special Thanks ====
I like to give my credits and thanks to the people how directly or indirectly helped to create this profile for the P2S. TimNolte & BlockBadger on the OPR Discord server, to mention two of them, but there are many other in chat that contributed. Thank you for the ongoing feedback, tips and tweaks.
 
Additionally, the settings are based on the following other available profiles:


[[File:O2.png]]
* HoHansen:
** https://www.reddit.com/r/FDMminiatures/comments/1i8gy70/fdm_miniatures_how_i_support_them_and_some_updates/
** https://www.reddit.com/r/FDMminiatures/comments/1kyfq6m/precision_wall_generation_and_how_i_print_details/
** https://imgur.com/a/fdm-miniature-settings-hohansen-dDJyUuk
* Painted4Combat: https://www.youtube.com/watch?v=Lzf_pCKjJNo
* ObscuraNoc: https://www.reddit.com/r/FDMminiatures/comments/1rbnet7/high_quality_profile_version_20_is_here/

Revision as of 21:19, 5 March 2026

Sources and Inspiration

The following settings have been optimized for a BambuLab P2S. These settings and tweaks are based on the work of HoHansen, Timnolte, BlockBadger, Painted4Combat, ObscuraNoc and many more. At this point - Thank you for your work. If you like to read more about their specific settings, I linked to their posts at the end of this page.

Disclaimer: Please always check before printing if the settings are applicable for your setup, printer and environment.

Requirements for these settings

  • The nozzle is a stainless steel 0.2mm from BambuLab
  • The filament is SUNLU PLA+ 2.0 in the color bone white. Other colors might work as well.
  • OrcaSlicer in the newest version (this guide is written based on 2.3.2-rc)
  • Textured PEI Plate. Another will work as well but you will need to tweak your brim settings, temperature and cooling.

Settings

The settings are split up into the following section:

  • Baseline - How to start
  • Printer - Specific settings for the printer to made.
  • Filament - Configuration for the SUNLU PLA+ 2.0 filament.
  • Process - Printing profile.

Every setting is listed as a screenshot taken from OrcaSlicer.

Baseline

Start with a standard profile of the P2S and set it to 0.2mm nozzle, the according build plate and the filament type. Then set your base process settings to 0.08mm layer height. This is your baseline for the following configuration, since we will only touch certain values and leave the rest as configured in the standard profile of the 0.08mm layer height.

Printer

Filament

Process
Quality Settings

Strength

Speed

Support

Supports might need different settings per model and are as well subject to personal preferences.

Multimaterial

Others

Special Thanks

I like to give my credits and thanks to the people how directly or indirectly helped to create this profile for the P2S. TimNolte & BlockBadger on the OPR Discord server, to mention two of them, but there are many other in chat that contributed. Thank you for the ongoing feedback, tips and tweaks.

Additionally, the settings are based on the following other available profiles:

Retrieved from "https://fdm-support.ndigitals.com/index.php?title=Bambu_Lab_P2S&oldid=107"