New pages

16:4816:48, 9 March 2026 Bambu Lab P2S Support Settings (hist | edit) [673 bytes] Chris (talk | contribs) (Created page with "== Variant 1 - Tree Hollow Infill == Supports might need different settings per model and are as well subject to personal preferences. File:Sup_(1).png File:Sup_(2).png File:Sup_(3).png == Variant 2 - Tree Organic with Infill (Experimental) == These settings are currently experimental and require the newest version of Orca Slicer. Use at your own risk. File:Sup organic (1).png File:Sup organic (2).png File:Sup organic (3).png") Tag: Visual edit

00:0400:04, 5 March 2026 Printing Miniatures/Printing Tips & Guides (hist | edit) [7,220 bytes] TimNolte (talk | contribs) (Created page with "General printing tips and guides for printing miniatures via FDM. ==== Layer Height ==== Start with 0.06mm layers. You may see a lot of advice online for 0.08mm layers, but they struggle due to how bad their overhangs are. 0.06mm is not a lot slower, but the quality increase along with better overhang performance I believe it worth it. If your happy with your profile at 0.06mm, then you can try lower. But take it slow, and things will start to get strange. Badger think...") Tag: Visual edit