8 June 2026
- 01:5501:55, 8 June 2026 Elegoo Centauri Carbon (hist | edit) [740 bytes] TimNolte (talk | contribs) (Created page with "=== Timnolte CC1 OrcaSlicer Profile === This profile uses the v8(beta) supports settings. These settings require a highly calibrated filament profile that supports good overhangs at a 70 degree or better overhang. * 0.2mm nozzle * 0.06mm layer height * Organic Tree Support (some keys to note) ** Raft: (This is generally turned off when used but sometime a model may need it ssuccessfully print.) *** 2 Layers *** 0mm Contact Distance ** Support Walls: 1 (required if using...") Tag: Visual edit
12 March 2026
- 03:3203:32, 12 March 2026 Printing Miniatures/Printing Tips & Guides/Timnolte Supports v7 (hist | edit) [964 bytes] TimNolte (talk | contribs) (Adds supports v7 beta page) Tag: Visual edit
- 03:3003:30, 12 March 2026 Printing Miniatures/Printing Tips & Guides/Timnolte Supports v6 (hist | edit) [756 bytes] TimNolte (talk | contribs) (New v6 supports page) Tag: Visual edit