View source for Elegoo Centauri Carbon

=== Timnolte CC1 OrcaSlicer Profile ===
This profile uses the v8(beta) supports settings. These settings require a highly calibrated filament profile that supports good overhangs at a 70 degree or better overhang.

* 0.2mm nozzle
* 0.06mm layer height
* Organic Tree Support (some keys to note)
** Raft: (This is generally turned off when used but sometime a model may need it ssuccessfully print.)
*** 2 Layers
*** 0mm Contact Distance
** Support Walls: 1 (required if using a support infill)
** Base Pattern Spacing: 0.1mm (This is the amount of infill. This setting makes them more or less dense. My setting makes them more dense for strength.)

File: https://drive.google.com/file/d/1E1KBjKjxWirFXMaw81OrikvumZ0J531T/view?usp=drive_link